Training Conveyor Design
Informasi Pelatihan Desain Konveyor
The Conveyor Design course covers the fundamentals of belt conveyor engineering including: belt width and velocity selection, conveyor power demand, belt sag, drive traction, drive types, brakes and holdbacks, information on conveyor arrangements, vertical curves and transitions, material trajectory calculations etc. plus belt, idler and pulley selection. In many of these topics, outdated conventional design methods are challenged and alternative solutions provided. While some people may feel that they already have an adequate understanding of these topics, the real value of this course comes from the fact that it is packed with practical information that is not available in other texts. This Conveyor Design course is suitable for engineers employed in the design, operation and maintenance of belt conveyor systems, from graduates with a few years experience, through to engineering and maintenance managers.
Objective :
The objective of the conveyor design course is to give engineers a full understanding of the conveyor design and equipment selection process, together with features of belt conveyors that should be avoided. This knowledge can then be used, not only in the design of new conveyor systems, but also by project engineers involved with new conveyors or existing conveyor upgrades and by those involved with the operation or maintenance of conveyor systems.
OUTLINE MATERI :
1. Introduction, including brief history of belt conveying
2. Material properties
3. Conveyor surcharge angle and burden edge distance selection, including the influence of loading area design and belt velocity on surcharge angles
4. Idler geometry, including troughing angle and centre roll length considerations
5. Belt width and velocity selection
6. Flooded belt considerations including determining the length of flooded belt resulting from overlapping stopping times and the approximate force required to extract material from a blocked chute
7. Conveyor power demand calculation
8. How conveyor design packages work, including basic information on rigid body acceleration and deceleration calculations
9. Differences between rigid body and flexible body dynamic analysis
10. Belt sag requirements
11. Drive traction calculations, including what actually happens at a drive pulley
12. Rubber v ceramic lagging
13. Outline of drive types
14. Brakes
15. Determination of holdback requirements
16. Transitions
17. Vertical curves
18. Conveyor layouts including features to avoid
19. Uneven wear problems on pulleys
20. Shuttle conveyors
21. Travelling trippers, including the design of tripper belt profiles
22. Take-up systems
23. Trajectory calculations
24. Conveyor belting
25. Skirt systems
26. Belt safety factor selection, a new method of assessing safety factors
27. Minimum pulley diameter determination
28. Pulleys
29. Conveyor alignment and belt tracking
30. Idlers
31. Some general info on the design and construction of the Channar
20 km conveying system
PESERTA
Para karyawan di semua lini bagian Conveyor Design.
Metode Pelatihan :
- Presentasi
- Diskusi
- Case Study
- Simulation
- Evaluation (Pre and Post Test)
- Kunjungan/Praktek (Menyesuaikan/tentative)
| Jadwal Training |
|---|
| - 20-22 Januari 2026 - 10-12 Februari 2026 - 3-5 Msret 2026 - 21-23 April 2026 - 19-21 Mei 2026 - 9-11 Juni 2026 - 7-9 & 28-30 JuIi 2026 - 19-21 Agustis 2026 - 15-17 September 2026 - 13-15 Oktober 2026 - 3-5 & 17-19 November 2026 - 1-3 & 15-17 Desember 2026 - |
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
| Fasilitas | Lokasi & Investasi |
|---|---|
| - FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal) - FREE TransporsiPeserta ke tempat pelatihan . - Module atau Handout - FREE Flashdisk - Sertifikat - FREE Bag or bagpackers (Tas Training) - Training Kit (Dokumentasi photo, Blocknote, ATK, etc) - 2x Coffe Break & 1 Lunch, Dinner - FREE Souvenir Exclusive - Training room full AC and Multimedia | - Yogyakarta - Jakarta - Bandung - Bali - Surabaya - Malang - Batam - Lombok |
Catatan : Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.
Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama.
Informasi lebih lanjut bisa menghubungi kami di 0813 9174 4475 / informasi.diklatindonesia@gmail.com